volvo — Volvo Trucks Service Manual Group 177-500

Group 170 Preventive Maintenance Check the wiper arm tension and condition of the wiper blades. To complete a function check of the battery mounting, and connections, complete the following: 1 Inspect battery hold-downs for proper placement and tightness. 2 Make sure the connections are free from corrosion. 3 Inspect cables for proper length, chafing and proper routing. 4 Check terminals for tightness and cracks. 5 Remove any corrosion from cable ends and battery posts. 6 After cleaning, spray corrosive preventive on posts, terminals and general area around them. 7 Ensure that the battery ground connections from the engine to the frame are secure and free from corro- sion. Note:

The battery ground connection goes directly to the starter motor. 62 30 Function Check of Wipers and Washers 31 Check Battery Mounting, Connections and Fluid Levels