volvo — Volvo Trucks Service Manual Group 177-500

Group 170 Preventive Maintenance Front Suspension, Steering System Checks Note: For further information refer to literature in Func- tion Group 6. To perform a check of the Gaiters/Plastic Covers and clearance for the Ball Joints complete the following: 1 Check that all Gaiters/Plastic Covers are undam- aged. 2 Check joints for play by manually pushing and pulling each ball stud. Note: For further information refer to literature in Func- tion Group 6. To perform a check of the Servo Pump and Steering Gear complete the following: 1 Check the steering shaft, drag link and tie-rod. In- spect for damage or external wear. 2 Check joints for play by manually pushing and pulling each ball stud.

3 Check the steering gear for leakage around the seal areas and hydraulic fittings. Inspect frame to gear, or frame to bracket to gear fasteners for signs of looseness or cracks. 4 Check axial and radial king pin wear. 5 Check pitman arm for damage. Check that the fas- tener to the sector shaft is not showing signs of looseness. 74 46 Check Gaiters/Plastic Covers and clear- ance for Ball Joints 47 Check Servo Pump and Steering Gear