Group 170 Preventive Maintenance Note: For further information refer to literature in Func- tion Group 5. To perform a check of the brake discs and calipers com- plete the following: 1 Remove the wheel. 2 Inspect the brake discs and calipers for signs of wear or damage. Note: For further information refer to literature in Func- tion Group 5. To perform a check of the brake lever, slack adjuster, and brake drums travel complete the following: 1 Remove the wheel and brake drums. 2 Inspect brake lever for signs of wear or damage. 3 Check the slack adjuster throw and operation. Note: Maximum throw allowed is: 5 1/2 in. slack ad- juster: 25-30 mm (1-1 1/4 in.); 6 in. slack adjuster:
20-25 mm (3/4-1 in.). 4 Verify that the length of both slack adjusters on an axle is of the same length. 5 Inspect the brake drums for oil, cracks, heat spots or heavy wear. 85 65 Check Brake Disc and Calipers 66 Check Brake Levers, Slack Adjusters, and Brake Drums Travel