. OPERATION OPERATION WARNING REMARK If the belt is damaged or fluff is starting to form, or if there is any damage or deformation of the seat belt holders, replace the seat belt. 3 - 70 9. Check for loose air cleaner mounti ng bolts Check for the loose bolts. If loose, tighten them. 10. Check for loose bat ighte n any loose t 11. Check for damage to the seat belt and mounting clamps.
Even if ther e appears to b e no abnormality with the seat be lt, replace it onc e every The date o f manufactur e of the seat belt is marked on the belt a t the plac e indicated by the a rrow in the diag ram on the ri Che ck that there are no loose bolts on t he equipment mountin g the seat belt to the machin e, and tighten if Tightening torque: 24.5 ± 4.9 Nm (2.5 ± 0.5 kgm, 18 .1 ± 3.6 l bft 12. Clean cab window. Clean the cab wind ow to ensure go od visibility w hen operating the