Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING CAUTION 1. Open top cover (1) at the front of the engine hood. 2. Check that the coolant level is between the FULL and LOW marks on radiator sub-tank (2). If the coolant level is low, add coolant through the coolant filler of sub-tank (2) to the FULL level. 3. After adding coolant, tighten the cap securely. 4. If sub tank (2) is empty, check for coolant leakage, then check the coolant level in the radiator. If the coolant level is low, add coolant to the radiator, then add coolant to sub tank (2). THE TIRES 3 - 74 Do not open the radiator cap unle ss necessary.

When checking the coolant, always wait for the engine to cool down and check the sub tank. Immediately after the engine is st opped, the coolant is at a high temperatur e and the radiator is unde r high internal pre ssure. If the cap is removed to check th down, then turn the cap slowly to e coolant level in this condition, there is a hazard of burns. Wait f or the temperatur e to go release the pressure and remove it carefully. When adding coolant, use the step a nd handrail provided.

Support your body If the volume of coolant added is more than usual, check for possible Confirm that there is no oil in the CHECK INFLATION PRESSURE Measure the inflation pressure w ith a tire pressure gauge, while th e tires are cool, before sta Check for damage or wear to th e tires and the rims. Check for loose wheel hub nuts (bolts). The appropriate inflation pressu (PAGE 3-110)" for details.