Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK FUEL LEVEL, ADD FUEL WARNING 1. Turn the engine starting switch to the ON position and check 3 - 76 When filling with f uel, do not add any more f uel after the fuel supply h as automatically stopped. If too m uch fuel is added, there is danger that the fuel may expand because of the rise in the ambient temperature and cause the fuel to Spilled fuel may c ause fire, so always wipe o ff any spilled fue l completely.

Fuel is highly flam mable and a dangerous su bstance, so do n ot bring any fire NOTICE If the engine has r un out of fuel and has stop ped, it is necessa ry to operate the priming pump to bleed th e air completely from the fuel line before sta rting the engine again. of lack of fuel. ing operation can be carried out more quickly on a full tank of fuel. Take care not to le t the engine stop because If the engine has r un out of fuel, the air bleed ing operation ca n be carried out more quickly on a full tan l with fuel level gauge ( ng, turn the switch back to the OFF po 2.

If the fuel le vel is low, open rear gril l (1) and add f uel through the filler port For details o "METHOD O (PAGE 3-42 (F) to fill the tank. f the method for opening and closing the cap, see F OPENING AND CLOSING CAP WITH LOCK )". fuel, tighten the cap securely. pacity: 175 liters (46.24 US gal) 3. After adding fuel, tighten the cap se Fuel tank ca pacity: 175 liters (46.24