. OPERATION OPERATION DELUXE SUSPENSION SEAT (If equipped) height. Amount of adjustment: 50 mm (2.0 in) (D) Setting seat for weight Turn grip (3) to adjust the strength of the suspension. Adjustment range: (Target) 50 to 120 kg (110 to 265 lb) (E) Adjusting reclining angle Move lever (4) up and move the backrest to the front or rear. Adjustment range: Front 24 degrees , Rear 3 degrees (F) Lumbar support Turn grip (5) to adjust the tension applied to the lower back. (G) Adjusting headrest height Move the headrest (6) up or down. Amount of adjustment: 50 mm (2.0 in) (H) Adjusting headrest angle Rotate the headrest (6) to the front or rear. Adjustment range:
60 degrees 3 - 80 (A) Fore-and-aft adjustmen t Pull lever (1) up, set the se at to the desired position, then release the lever. 20 mm (4.7 in) Fore-and-aft adjustment: 1 (B) Adjusting seat angle h down on the rear of the seat to tilt it Move lever (2) up and pus backward. Move lever (2) down and p ush down on the front of the seat t o tilt it forward. ees (Tilt forward/tilt back angle) Adjustment range: 13 degr (C) Adjusting height of sea Move lever (2) up or down t is also used to adjust the t o move the seat up or down. This lever seat angle. Adjust the seat angle and (I) Adjusting armrest angle ted by hand to spring up approx. 90 ).
Armrest (7) can be opera degrees (both left and right In addition, dial (8) under t he armrest can be operated by han d to make fine adjustments of t (left side only). he armrest in the up or down direction Adjustment range: forward tilt 25 degrees, backward tilt 5 degrees