. OPERATION OPERATION OPERATIONS AND CHECKS BEFORE STARTING ENGINE WARNING REMARK If directional lever (2) is not set to the N position, the engine will not start. 3 - 83 When starting t he engine, check that the work equipment lock leve r are p laced securely at the L OCK position. If the work equipment contr ol lever is touche d by acci dent whe n the e ngine is s tarted, the work equipment ma y move unexpectedly and cause serious in jury or da mage. 1. C heck that parking brake l ever (1) i s at the LOCK position 2. C heck that direction al leve r (2) is at the N p ositio 3. C heck that the buck et is c ompletel y lowere d to th e ground . If it is not c as follows.
1) Check HOLD the FR 2) Operat bucket 3) Check HOLD the LO it is not c ompletel y lowered, lowe r the bucket t o the ground s follows. that the work equipment control lever is at the 1) Check equipme the HOLD position, then set the work equipment lock lever to on. rk equipment control lever to lower the ound. work equipment control lever is at the et the wo rk equipment lock l eve r to the FR EE positi 2) Operat e the wo bucket to the gr ound. work 3) Check that the equipme the HOLD position, then set the work equipment lock lever to on. et the wo rk equipment lock l eve r to the LO CK positi