. OPERATION TROUBLESHOOTING can be operated, and the engine is running, it is possible to tow the 3 - 123 The towing machine should normally be of the same class as the machine being towe d. Check that the towing machine a nd towed machine both have ample braking power and that the towing mac hine has ample rimpull to control bot h machines on the slopes or on the tow road. y be necessary to connect another machine to the rear of the machine When towi ng a machine downhill, it ma being towe d in order to provide ample rim pull and braking power. This makes it possibl e to prevent the machine from losing control.
y be carried out under vario us differing conditions, so it is impossible to determine beforehand the Towing ma requireme nts for towing. Towing on flat horizontal roads will require the minimum rimpu ll, while towing on slopes o r on unev en road surfaces will require t Connect a diagram at WHEN ENGINE CAN BE USED If the transmission and steering wheel If the trans machine o ut of mud or to move it for a s The opera is towed. WHEN ENGINE CANNOT BE USED opped, use the following procedure. When towing a machine with the engine st 1. 2. 3. 1. The trans fer oil does not lubricate the s ystem, so remove the front and rear drive shaft s.
If necessary, block the tires to pr event the machine from movi ng. move the steering cylinder. 2. The steer ing cannot be operated, so re Even if th e brakes are in good conditio n, the brakes can only be used a limited num ber of times. There is no change i n the operating force for the brake pedal, but the braking force is reduced each time the pedal is d. depresse 3. Connect t he towing equipment securely . When carrying out towing operations, use tw o machines of at least the same cla ss as the machine being towe d. Connect one machine each to the front and r ear of the machine being towed, th en remove the blocks from th e tires and tow the machine.
EMERGENCY TRAVEL OPERATION ed out by electric signals. If there should be a failure in the electrical The normal g ear shifting operation is carri system and t he machine does not move, p lease contact your Komatsu distributor to hav e the machine moved. NOTICE Always reques t your Komatsu distributor to car