. MAINTENANCE OUTLINES OF SERVICE OUTLINES OF SERVICE HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC 4 - 4 Always use Komatsu genuine parts for r When changing the oil or adding oil, do n ot mix different types of oil. When changing the type of oil, drain a ll the old oil and fill completely with the new oil . Always replace the filter at the same time. (There is n o problem if the small amount of oil remaining in the pipin OIL Oil is used in the engine and hydraulic e pressure), and deteriorates with use. Always use oil that matches the grade an Operation and Maintenance Manual.
Ev quipment under extremely severe conditions (high temperature, high Always use oil that matches the grade an d maximum and minimum ambient temperatures recommended i n the Operation and Maintenance Manual. Ev en if the oil is not dirty, always change the oil at the sp ecified interval. Oil corresponds to blood in the human bo dy, always be careful when handling it to prevent any im purities (w ater, metal particles, dirt, etc.) from getting in. ne are caused by the entry of such impurities. ties get in when storing or adding oil. ds. th causes of problems.
The majority of problems with the machi Take particular care not to let any impuri Never mix oils of different grades or bran Always add the specified amount of oil. Having too much oil or too little oil are bo If the oil in the work equipment is not cle ar, there is probably water or air getting into the circuit. In such c ases, please contact your Komatsu distributor. e related filters at the same time. ade of the oil periodically to check the condition of the machine. For e contact your Komatsu distributor. may be necessary to reduce the oil change interval.
When changing the oil, always replace th We recommend you have an analysis m those who wish to use this service, pleas When using commercially available oil, it We recommend that you use the Komats u oil clinic to carry out a detailed checks of the characteristics of th e oil. mperature, high FUEL To prevent the moisture in the air from co ndensing and forming water inside the fuel tank, always fill the fuel tank after completing the day's work. and if fuel containing water or dirt is used, it cannot work properly. get in when storing or adding fuel. ation and Maintenance Manual.
The fuel pump is a precision instrument, and if fuel containing water or dirt is used, it cannot wo rk properly Be extremely careful not to let impurities Always use the fuel specified in the Oper Fuel may congeal depending on the tem perature when it is used (particularly in low temperatur es below - 15° C (5°F)), so it is necessary to use the fuel t hat is suitable for the temperature. Before starting the engine, or when 10 mi nutes have passed after adding fuel, drain the sediment and water from the fuel tank. If the engine runs out of fuel, or if the filte rs have been replaced, it is necessary to bleed the air from the ci rcuit.