Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 4. Clean the interior of the air cleaner body, cover (3) and evacuator valve (6). When 5. Direct dry compressed air (Max. 0.69 MPa (7 kg/cm 2 , 99.4 again from the inside. 1) Replace any outer element which has been cleaned 6 same time. the element. NOTICE CAUTION its original position. 4 - 18 NOTICE The inner element mu replacing the outer ele ment, replace the inner elemen t at the same side of the outer element al ong its folds. The essed air from the outside a long the fold s, an d for 1 year.

Replace the in ner elemen t at th h inner and outer elements when the du st indicator re d piston appear s soon after installin g the er element even though it h as not been cleaned 6 6. If small holes or thinner parts are found on the elemen t whe hining a light through it afte r cleaning, r eplac When cleaning the ele ment, do not hit or beat it again st anything. Do not use an element whose folds, gasket or seal ar When installing the co ver (3), check O-ring (7) and re place it if ther e are a ny 7. Set the cleaned outer element in position, t hen secure cover (3 ) with mounting clips ( 8. Press the button of dust indicator (1) to retu rn the red pi ston t