Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE 2. When adjusting, loosen 4 bolts (1), turn 2 adjustment bolts (2), and move bracket (3) and the compressor as one unit. 3. After adjusting, tighten bolt (1) and the locknut of bolt (2). NOTICE CHECK FOR LOOSE WHEEL HUB BOLTS, TIGHTEN wear will be increased and always turn the nuts in the Nm (80 to 100 kgm, 578.6 to stud bolt is broken, replace all the stud bolts for that 4 - 44 ADJUSTING 1. Open th e engine side cover on the right side of t he machi Check eac h pulley fo r damage, wear of the V-groove, and wear of th e V-belt.

I n particular, be sure to check that the V-belt is not touching t he bottom of the V-groove In case an y of the fo llowing occurs, ask the Komatsu dis tributor in your territory to replace the b • The fan belt has e longated, leavin g little allowance for adjustme • A cut or crack is f ound on the belt • Slipping or creaki ng sound is hea rd coming from the When the new V-belt is set, readjust it after one hour of operation. I f wheel hu b bolts (1 ) are loose, ti used. accidents m ay be ca 1. Check f or loose nuts, and tight When c hecking for loose nuts directio n of tightening to check. Tightening torqu e: 785 to 980 723.3 lbft) 2. wheel.