. MAINTENANCE SERVICE PROCEDURE LUBRICATING NOTICE 4 - 46 On j obsites where th ere is a lot of heavy-duty work, or on jobsites where operations are carried out c ontinuously for more than eigh t hours, reduce the greasing interva l and carry out greasing more 1. Put the work e quipment horizontally i n contact with the ground then stop the 2. Using a greas fittings marked 3. After greasing , wipe off any old grease tha t was pushed hrough the (1) Bucket pin (2 p (2) Bucket link pin (3) Dump cylinder pin (2 places) (4) Lift cylinder pin (5) Lift arm pivot p (6) Bell crank pin ( (7) Steering cylind