. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING then 3 - 38 Engi ne parts and oil are at high temperature i mmediat ely after th e engine is stopped, and will cause seri ous burns. Wait for the temperature to cool dow n before starting the operation 1. Open engine hoo d. (G) and wipe the oil off with a cloth. 2. Remove dipstick (G) and wipe the oil off with 3. Completely inser t dipstick (G) into r emove it and che 4. The oil level shou ld be between the H and L marks on dipstick ( I G). f the oil level is b elow the L mark, ad d oil thr ough oil f iller (F). 5.
I f the oil is above the H mark, drain th e exces s engine oil from drain plug (P), an d check the oil leve l again. 6. I c f the oil level is c lose the engine REMARK t an angle, reposition it to level before checking. If the machine is a t an angle, repositi on it to l evel befor When checking th e oil level after the engine h as been operated, allow the engine to cool f or 15 minutes before checking.