. SAFETY PRECAUTIONS FOR MAINTENANCE SAFETY PRECAUTIONS FOR MAINTENANCE Parts may break or be sent flying. 2 - 34 Lock the front and rear frames with frame lock TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNIN G To prevent injury, do not carry out maintenance with the e ngine running. If maintenance must be carried out with the engine running, carry out the operation with at least tw One worker must always sit in the operator's s eat and b e ready to stop the engi contact with the o worker maintain When carrying o rotating parts, the be careful not to c re is a hazard of being caug ht in the p arts, so Never drop or inse rt tools or other objects into t he fan or fan belt.
Set work equipm ent lock lever (1) to prevent the work brake lever (2) t moving. Do not touch any be operated, give a move to a safe pl signal to the other workers to warn them to ace. them to OCK po sition to hen pull parking INSPECTION AND MAINTENANCE AFTER TURNING E.C.S.S. SWITCH OFF For machines equip ped with a E.C.S.S. lower the bucket t o the ground, turn the E.C.S.S. switch OFF, and stop the engine before startin g inspection or maintenanc e. NEVE R turn the switch ON during in spection or maintenance