Safety—Operating Precautions Use Steps and Handholds Correctly Prevent falls by facing the machine when getting on and off. Maintain 3-point contact with steps and handrails. Never use machine controls as handholds. T133468 —UN—15APR13 Use extra care when mud, snow, or moisture present slippery conditions. Keep steps clean and free of grease or oil. Never jump when exiting machine. Never mount or dismount a moving machine. TX03679,00016F2 -19-24APR13-1/1 Start Only From Operator's Seat Avoid unexpected machine movement. Start engine only while sitting in operator's seat. Ensure all controls and working tools are in proper position for a parked machine.
T133715 —UN—15APR13 Never attempt to start engine from the ground. Do not attempt to start engine by shorting across the starter solenoid terminals. TX03679,0001799 -19-22APR10-1/1 Use and Maintain Seat Belt Use seat belt when operating machine . Remember to fasten seat belt when loading and unloading from trucks and during other uses. T133716 —19—17APR13 Examine seat belt frequently. Be sure webbing is not cut or torn. Replace seat belt immediately if any part is damaged or does not function properly. The complete seat belt assembly should be replaced every three years, regardless of appearance.
DW90712,0000181 -19-29JUN06-1/1 Prevent Unintended Machine Movement Be careful not to accidentally actuate control levers when co-workers are present. Pull pilot control shutoff lever to locked position during work interruptions. Pull pilot control shutoff lever to locked position and stop engine before allowing anyone to approach machine. T133863 —UN—20SEP00 Always lower work equipment to the ground and pull pilot control shutoff lever to locked position before standing up or leaving the operator's seat. Stop engine before exiting. TX03679,0001746 -19-24JAN07-1/1 1-3-1 060313 PN=22