Maintenance—Periodic Maintenance Item Part Number Initial Service - 250 Hours Every 250 Hours Every 500 Hours Every 1000 Hours Every 2000 Hours Every 4000 Hours Every 4500 Hours Swing Gearbox Oil AT303189 1 1 1 1 1 Travel Gearbox Oil AT303189 2 2 2 2 2 DIESELSCAN Kit AT180344 1 1 1 1 1 COOL-GARD™II Test Strips TY26605 1 1 1 1 1 COOLSCAN PLUS Kit AT183016 1 1 1 1 1 * For recommended oil viscosities based on operating temperatures, see Maintenance-Machine (Section 3-1). Model: 450CLC Excavator Customer: PIN/Serial Number: Delivery Date: Hour Meter Reading: OIL SAMPLING Oil samples should be taken from each system prior to its recommended drain/change interval indicated on this form:
250, 500, 1000, 2000 hours. Maintenance recommendations supplied by OILSCAN will be provided based upon the oil analysis and operating information you supply. Regular oil sampling will extend the operational life of your machine’s systems.
Every 250 Hours □Check swing gearbox oil level □Check battery electrolyte level and terminals □Clean air cleaner elements □Check radiator coolant level □Check travel gearbox oil level □Drain hydraulic tank sump □Take engine oil sample □Lubricate swing bearing gear □Replace pump drain oil filter Every 500 Hours □Check air intake hoses □Replace hydraulic oil filter □Change engine oil and replace filter □Lubricate swing bearing □Replace fuel filter/water separator □Take engine coolant sample □Take diesel fuel sample □Take travel gearbox oil sample □Take swing gearbox oil sample □Clean cab fresh air and recirculating air filters (replace every 6 cleanings) □Take hydraulic reservoir oil sample Every 1000 Hours □Change swing gearbox oil □Replace pilot control oil filter □Replace air cleaner elements and unloader valve □Replace hydraulic cap breather element □Clean engine crankcase vent tube and hose □Check coolant □Change travel gearbox oil □Drain, flush and refill cooling system Every 2000 Hours □Check and adjust engine valve lash (clearance) □Change hydraulic oil, clean suction screen Every 4000 Hours Every 4500 Hours □Replace engine torsional damper PLUS-50 is a trademark of Deere & Company COOL-GARD is a trademark of Deere & Company JH91824,0000220 -19-17JUL08-2/2 3-2-5 060313 PN=78