Maintenance—Every 10 Hours or Daily CAUTION: High pressure release of oil from pressurized system can cause serious burns or penetrating injury. Relieve pressure by SLOWLY loosening cap (1). 4. Insert 4 mm hex wrench (4) into hole (5) and turn counterclockwise to release locking pin. T135008 —UN—01NOV01 5. Slowly turn cap (1) counterclockwise a few degrees to relieve pressure. Remove cap. 6. Remove hydraulic oil tank cover. 7. Add oil. (See Section 3-1.) 8. Install hydraulic oil tank cover. 9. Install cap to case assembly (3) by aligning marks (2) and turning cap clockwise to lock position. 10. Tighten cap.
1— Cap 2— Aligning Marks 3— Case Assembly 4— Hex Wrench 5— Hole T135189 —UN—06NOV00 VD76477,0000108 -19-29JUN06-2/2 3-4-3 060313 PN=87