SECTION 5 MAINTENANCE Page 24 COOLING SYSTEM To remove the cap, press it down and turn until it is free to be removed. Prior to removing the cap make sure all pressure is released. When installing the cap, the gasket and contacting surfaces must be clean. Turn the cap to the right or clockwise until snug. Fig. 5.9. Radiator Cap Fig. 5.9A. Radiator Cap (CE Version) 5.8.4. CHECKING THE COOLANT LEVEL NOTE : Check the coolant level before starting the engine. To obtain the proper reading place the machine on level ground. 1. Check the coolant level through the sight gauge (Fig. 5.10) in the radiator top tank.
The coolant should be visible in the sight gauge and the coolant level should be midway of the sight gauge (in CE version the access to the gauge is gained after lifting the radiator grill, 1, Fig. 5.48A). 2. Add coolant if it must be added; remove the radiator cap as outlined above (Fig. 5.9). 3. Add coolant until the level in sight gauge in reached. 4. Reinstall the radiator cap. OM515C520C99/1E DRESSTA