Komatsu — 6.9.2. BUCKETS FOR QUICKCOUPLING

SECTION 6 SPECIFICATIONS Page 32 6.9. 515C AND 520C LOADERS EQUIPMENT The following equipment can be mounted on a loader instead of the standard bucket: 6.9.1. QUICKCOUPLING The loader can be equipped with a quickcoupling designed for quick installation and removal of optional equipment (bucket, forklift, dozer blade). The quickcoupling (Fig. 6.11) consists of a welded tool carrier fitted with two cylinders operating two pins locking the equipment on the tool carrier. The tool carrier is fastened on the boom with mounting pins. The quickcoupling cylinders are controlled from the operator’s compartment (refer to QUICKCOUPLING, Section 4.20).

Before operating any mounted equipment make sure it has been fastened securely and that the locking pins have slid into the matching holes. Fig. 6.11. Quickcoupling 1. Tool Carrier 2. Hydraulic Cylinder 3. Locking Pin 6.9.2. BUCKETS FOR QUICKCOUPLING The following are the buckets designed for installation on the tool carrier, their capacities and application: 515C 520C Bucket capacity [m 3 ] Soil density [kg/m 3 ] Bucket capacity [m 3 ] Soil density [kg/m 3 ] 1.05 2000 and less 1.72 1800 and less 1.24 1800 and less 1.91 1600 and less 1.44 1600 and less 2.10 1400 and less 1.53 1500 and less 1.62 1400 and less OM515C520C99/1E DRESSTA