SECTION 4 OPERATING Page 22 CAB DOOR AND WINDOWS Fig. 4.13. Solid Base Operator’s Seat and its Adjusting Controls 1. Seat 2. Inner Height Adjustment Post 3. Outer Height Adjustment Post 4. Seat belt SUSPENSION SEAT (VIKING-BOSTROM) Fig. 4.14. Suspension Seat Adjusting Controls (Viking-Bostrom) 1. Preload Adjustment Ratchet Lever 2. Back Seat Angle Adjustment Catch 3. Seat belt 4. Forward and Rearward Control Lever For operator’s convenience in reaching the controls and improved operating visibility, the operator’s seat can be adjusted to various positions. Pull lever (4) back and slide the seat to the desired forward or rearward position. Release the lever to lock the seat.
To adjust the angle of the back seat cushion, lift up the seat back and tilt it to one of its three positions. Release the cushion allowing the catches on the seat back to engage in bracket notches (2).The suspension preload should be adjusted to the operator’s weight for proper ride control. While sitting in the seat, turn ratchet lever (1) clockwise to increase the preload. Turn the ratchet counterclockwise to decrease the preload. OM515C520C99/1E DRESSTA