OPERATING SECTION 4 Page 31 4.12. DRIVING THE MACHINE Fig. 4.24. Driving and Stopping the Machine (Standard Version) Fig. 4.25. Driving and Stopping the Machine (Upgraded Version) 1. Transmission Gear Range Lever 2. Transmission Direction Lever 3. Brake Pedal 4. Accelerator Pedal 5. Boom and Bucket Pilot Control Valve Lever 6. Parking Brake Lever 7. Bucket Control Lever 8. Boom Control Lever 1. Depress brake pedal (3). 2. Release parking brake lever (6). 3. Using lever (8 standard version) or lever (5 upgraded version), raise the boom until the bucket is off the ground and in the carry position. 4. Using lever (7 standard version) or lever (5 for upgraded version), close the bucket. 5.
Place transmission gear range lever (1) in the first gear position. 6. Move the transmission hinge lock plate to the right. Then place the transmission direction lever (2) in the desired position forward or reverse. NOTE: If the machine is equipped with a back-up warning alarm, the alarm will sound when the lever is placed in reverse. 7. Release brake pedal (3) and gradually depress accelerator pedal (4). DRESSTA OM515C520C99/1E