OPERATING SECTION 4 Page 45 LOADER TECHNIQUES Fig. 4.47. Transporting full Bucket 7. Upon reaching the truck, raise the bucket high enough to clear the truck body. Reduce forward speed and dump the load slowly (Fig. 4.48). This will reduce the shock of weight transfer to the rear axle when the bucket is emptied. Shake the bucket and raise the boom to loosen dirt from within. When the bucket empties, close it. Back the loader away from the truck, lower the boom and return to the loading site. If the boom height is insufficient to clear the truck pack or the loaded container, build a ramp out of hard ground.
Using the automatic boom kick-out and bucket leveler is particularly recommended in continuous operation of even working cycle. For this kind of operation the positioning of the truck receiving the spoil is of importance. Fig. 4.48. Dumping Into Truck DRESSTA OM515C520C99/1E