Komatsu — 4.18.2. DIGGING, CLEARING AND LEVELING

SECTION 4 OPERATING Page 50 LOADER TECHNIQUES 4. When clearing a rocky area, remove the small and loose rocks first, large and solid rocks can then be loosened and moved with less difficulty. When loosening large or solid rocks, greater force and penetration can be obtained by digging under the rock with the bucket (Fig. 4.57). Lifting the rock with the bucket while pushing will increase traction i reduce wheel spinning. Never use the clamshell to remove buried or anchored objects. Fig. 4.57. Large Rock Removal When finishing a non-solid material, position the bucket as shown in Fig, 4.58 or Fig. 4.59 and backdrag the loose material.

This method is not recommended where abrasive material is common. Fig. 4.58. Backdragging and Leveling Fig. 4.59. Backdragging and Leveling with Multi-Purpose Bucket OM515C520C99/1E DRESSTA