OM3247 9/11 Operator Cab and Controls - Section 32 Page 32-5 HEATER / AIR CONDITIONER CONTROLS The heater/air conditioner compartment contains heater/air conditioner controls and some of the heater/air conditioner components, such as the blower motor, evaporator and heater coil. Optimum cab air climate can be obtained by using the following controls in various combinations. Heater/Air Conditioner Vents Heater/air conditioner vents (6, Figure 32-3) may be rotated 360°. There are three vents in the heater/air conditioner compartment, four vents across the top of the instrument panel, and one vent each in the RH and LH instrument panels.
There are also an addi- tional four vents under the instrument panel. Air flow through the vents is controlled by manually opening, closing or turning the louvers. Fan Speed Control Knob Fan speed control knob (1, Figure 32-3) controls the blower motor. The fan (blower) motor is a 3-speed motor (low, medium and high). Speeds are selected by rotating the control knob clockwise to the desired position. OFF is in the full counterclockwise position. The fan speed control knob must be switched ON for the air conditioner to function. Temperature Control Knob Temperature control knob (2, Figure 32-3) allows the operator to select a comfortable air temperature.
The control knob determines the operation of the air conditioning and heater modes. Rotating the control knob counterclockwise into blue zone (3) will cause the A/C compressor to operate and result in cooler air temperatures. The full counterclockwise position is the coldest air setting. Rotating the control knob clockwise into red zone (4) will allow coolant to flow through the heater core resulting in warmer air temperatures. The full clock- wise position is the warmest heater setting. Air Flow Directional Knob Air flow directional knob (5, Figure 32-3) controls the direction of airflow as follows: FIGURE 32-3. A/C & HEATER CONTROLS 1. Fan Speed Control Knob 2. Temperature Control Knob 3.
Blue Zone 4. Red Zone 5. Air Flow Directional Knob 6. Vents Provides airflow to floor vents, only. Provides airflow to upper vents and floor vents. (Blue Icon) Provides dehumidified air to the upper vents and the floor vents. Defrost - Provides dehumidified air to the windshield. Defrost - Provides dehumidified air to the windshield as well as to floor vents.