John Deere Omar287594 — Using Front Hitch (If Equipped)

Hitch Attaching and Detaching Implement to/from Hitch E G CAUTION: Avoid possible personal injury and tractor damage. DO NOT use front hitch to lift tractor. Use correct lifting equipment. D F RXA0085786 —UN—10JAN06 IMPORTANT: Avoid damage to equipment. Be sure load is balanced side­to­side and front­to­rear. B 1. Adjust implement attaching points. (See implement operator’s manual.) A C 2. Lower lift arms (A) using remote hitch switch (F). 3. Position coupler ends of lift arms below implement link pins and slowly raise hitch until coupler ends lock on implement link pins. A—Lift Arms B—Quick Lock Pin and Pin C—Lock Nut D—Center Link E—Link End F—Remote Hitch Switch G—Retainer NOTE:

Keep center link in stored position when not in use. 4. Remove retainer (G) from center link. 5. Loosen lock nut (C). 7. Remove quick lock pin and pin (B) from storage location and attach center link to implement. 6. Hold link end (E) and turn center link (D) to adjust length. Tighten lock nut. Detach implement from hitch in reverse order of attaching. OURX935,0000482 ­19­02JAN08­2/2 50­24 122208 PN=143