TouchSet Depth Control TouchSet Scraper Control—for Scrapers Equipped with Scraper Control Unit B A CAUTION: Avoid personal injury or death. Moving scraper control unit, connectors, or linkages, when engine is running, may cause unexpected movement. Stay clear of implement when starting engine. RXA0083397 —UN—16AUG05 Tractor selective control valve (SCV I and/or SCV III) are used to electronically control raising, lowering, and setting of implement depth, without leaving the cab. (Used primarily in areas requiring automated laser guidance system for scraper applications.) Control lever (A) is used to manually control SCV I and activate an automatic scraper control system.
Control lever (B) is used to manually control SCV III and activate a second automatic scraper control system. RXA0097431 —UN—27FEB08 Detent time adjustment knob (C) allows operator determine the time allowed for cylinder to extend. A setting of replaces the zero detent time when SCV is activated by TouchSet Scraper controller. SET LOCK SET C A—SCV I Control Lever B—SCV III Control Lever C—Detent Time Adjustment Knob OURX935,000009A 1909SEP081/1 Enabling TouchSet Scraper Control System between the tractor’s SCV controller and the Laser Leveling Control system is established. must be shown for system to function.
Scraper controller must be connected to tractor’s optional implement harness’ 9pin connector. The scraper controlled SCV number (I or III), ”EC”, and 3 vertical bars will be displayed on TouchSet display between the SET switches once the tractor has started and communication Automatic scraper controller will be OFF until system is activated by moving SCV I or SCV III control lever to the lower detent position. OURX935,0000012 1902JAN081/1 554 122208 PN=147