Remote Hydraulic Connections Implement Connection, Example 5—Planter with Vacuum Motor, Return Line to Motor Return and Lift Assist D C A E E B F G H H F G RXA0096597 —UN—13AUG08 I A—Pressure Line B—Return Line C—Flow Control Valve (Wide Open) D—Vacuum Motor E—Fold F—Extend Coupler Line G—Retract Coupler Line H—Markers Lift Assist In this application vacuum motor (D) receives pressure oil from the SCV retract port. Return oil is routed to power beyond return port. If return hose is equipped with special return hose tip, it can be connected directly to SCV #3 extend port. When the motor is shut off, the SCV lever is moved to float position to allow motor to coast to a stop.
Moving lever to neutral will cause motor to stop abruptly and may damage seals. pump will operate at maximum pressure which may cause overheating of hydraulic oil if operating at same time outside air temperature is high. Lift assist cylinder oil is connected to auxiliary hitch valve port which is controlled by hitch command lever settings in the cab. Control valve (C) is wide open and flow is controlled by tractor control panel. If valve is used to control oil flow, OURX935,0000093 1915JAN081/1 658 122208 PN=163