Drawbar and PTO Using Correct PTO Shaft Diameter of the standard PTO shaft is 45 mm (13/4 in.). High power, heavy PTO loads require the strength of this large 20 spline shaft. Use this size whenever possible. The optional PTO package includes a 45 mm (13/4 in.), 1000 rpm stub shaft (A) with 20 splines for high power, heavy PTO loads and a 35 mm (13/8 in.), 1000 rpm shaft (B) with 21 splines and a 35 mm (13/8 in.), 540 rpm shaft (C) with six splines for light load applications only . RW55321A —UN—22OCT99 IMPORTANT: Use the 35 mm (13/8 in.) 540 rpm PTO shaft only on implements requiring less than 56 kW (75 PTO horsepower).
Use the 35 mm (13/8 in.) 1000 rpm PTO shaft only on implements requiring less than 112 kW (150 PTO horsepower). A—1000 RPM Stub Shaft B—1000 RPM End C—540 RPM End Use the 35 mm (13/8 in.) 540 and 1000 rpm PTO option for lightduty farm use only. Use the 45 mm (13/4 in.) 1000 rpm PTO shaft if heavier loads are expected. AG,RX15494,2759 1918SEP071/1 7010 122208 PN=176