Performance Ballasting Ballasting Suggestions for Specific Types of Implements These recommendations are offered as starting points when ballasting for operations with several common types of implements. Some deviations may be needed for specific circumstances. RXA0082878 —UN—08AUG05 Towed Draft Implements Towed equipment that place small vertical loads on the tractor drawbar such as disks, chisel plows, and field cultivators:
MFWD QUIK TATCH Weights None None (support only) 8130 8230 8330 8430 None (support only) 8 Rear Weights None None 1 pair 205 kg (450 lb) 1 pair 75 kg (165 lb) 1 pair 635 kg (1400 lb) and 1 pair 205 kg (450 lb) and 1 pair 75 kg (165 lb) Independent Link Suspension 8130 8230 8330 8430 8530 QUIK TATCH Weights None None None (support only) 4 8 Rear Weights None None None 1 pair 635 kg (1400 lb) and 1 pair 75 kg (165 lb) 1 pair 635 kg (1400 lb) and 1 pair 205 kg (450 lb) and 1 pair 75 kg (165 lb) BB92646,000005A 1915AUG051/3 Trailers, Towed Slurry and Fertilizer Tanks Implements that place high vertical loads on the drawbar or are connected to a high hitch point such as Premium Wagon Hitch:
MFWD and Independent Link Suspension RXA0082876 —UN—08AUG05 Front Ballast 20 QUIKTATCH weights or 900 kg (1984 lb) block weight. Rear Ballast None required. If rear weights are already installed, it is not necessary to remove them. NOTE: It may be practical to use less front weight with smaller trailers, but steering security and stability must be assured. Continued on next page BB92646,000005A 1915AUG052/3 757 122208 PN=184