John Deere Omar287594 — Implement Codes

Performance Ballasting Implement Codes IMPORTANT: Use a scale to check static weight, especially with heavy implements. Static weight remaining on the front wheels with the implement lifted should always be at least 50 percent of the weight with the implement resting on the ground. 4. Multiply Step 2 by Step 3. Divide by 1000. 5. Resulting number is the implement code. Use the prior information and refer to the appropriate chart to determine how many QUIK­TATCH weights are required. Determine the following: MFWD, or Independent Link Suspension Front tires with or without liquid CAUTION: Do not attempt to transport an implement without adequate front ballast.

Loss of steering control may result. With maximum front ballast, do not attempt to transport an implement whose code exceeds: 650 for MFWD 835 for 8130, 8230, and 8330 with Independent Link Suspension 865 for 8430 and 8530 with Independent Link Suspension Find implement code in John Deere implement operator’s manual. To find implement code for non­John Deere implements use the following procedure: 1. Estimate implement center of gravity (find or estimate fore­and­aft balance point) 2. Measure distance from implement hitch point to center of gravity. Record the distance (inches). Add 37 to this figure. NOTE: If no quick coupler is used, add 15 to code. 3.

Determine the implement weight (fully loaded). Record the weight (pounds). QUIK­TATCH Weights Required Tractor Code MFWD Independent Link Suspension 8130­8430 8130­8530 0—320 321—335 336—350 351—365 366—380 381—395 0 396—410 S 411—425 2 426—440 4 441—455 6 0 456—470 8 S 471—485 10 2 486—500 12 4 501—515 14 6 516—530 16 8 531—545 18 10 546—560 20 12 561—575 22 14 576—590 16 591—610 18 611—625 20 626—640 22 Continued on next page BB92646,000005F ­19­15AUG05­1/2 75­16 122208 PN=193