Fuels, Lubricants, and Coolant Fill Fuel Tank CAUTION: Handle fuel with care: It is highly flammable. Do not refuel the machine while smoking or when near open flame or sparks. Always stop engine before refueling machine. Fill fuel tank outdoors. TS202 —UN—23AUG88 Prevent fires by keeping machine clean of accumulated trash, grease, and debris. Always clean up spilled fuel. NOTE: Fuel indicator will flash when approximately 60 L (16 gal) of fuel remains. Fill fuel tank (A) at end of each day. This prevents condensation in tank as moist air cools.
A—Fill Fuel Tank RXA0086601 —UN—09FEB06 OURX935,000008E 1911JAN081/1 Lubricity of Diesel Fuel Most diesel fuels manufactured in the United States, Canada, and the European Union have adequate lubricity to ensure proper operation and durability of fuel injection system components. However, diesel fuels manufactured in some areas of the world may lack the necessary lubricity. If fuel of low or unknown lubricity is used, add John Deere PREMIUM DIESEL FUEL CONDITIONER (or equivalent) at the specified concentration. Lubricity of Biodiesel Fuel IMPORTANT: Make sure the diesel fuel used in your machine demonstrates good lubricity characteristics.
Significant improvement in lubricity can occur with biodiesel blends up to B20. The gain in lubricity above a 20% blend is limited. Fuel lubricity should pass a maximum scar diameter of 0.45 mm as measured by ASTM D6079 or ISO 121561. DX,FUEL5 1905OCT071/1 902 122208 PN=238