Maintenance and Service Intervals Service Interval Chart— Daily or 10 Hours—100 Hours (Initial)—250 Hours—500 Hours—750 Hours OURX935,000038D 1903SEP081/1 952 122208 PN=254 Item Daily or 10 Hours 100 Hours (Initial) 250 Hours 500 Hours 750 Hours Checking Engine Oil • Checking Tires • Checking Transmission/Hydraulic Oil Level • Draining Air Brake Tank • Lubricating Hitch Components • Checking Coolant Level (Coolant Recovery Tank) • Draining Water Separator • Checking Coolant Level (Dearation Tank) • Changing Engine Oil and Filter * • • Checking Neutral Start System (PST or AutoPowr Transmissions) • Checking Transmission PARK Position • Checking Wheel and Wheel Weight Bolts • Lubricating MFWD Axle And MFWD Axle UJoints *** • Lubricating Independent Link Suspension External Fittings *** And Axle UJoints • Checking MFWD Differential Case Oil Level • Cleaning Cab Air Filters ** • Checking Manual Brakes • Lubricating Front Hitch (If Equipped) • Draining Fuel Tank Sump • Checking ManuallyOperated Hitch For Wear • Checking Remote Controlled Hitch For Wear • Check Wear At Tow Hitch (Piton or Ball) • Check Swinging Drawbar For Wear • Check towHook On PickUp Hitch For Wear • Checking MFWD or Independent Link Suspension Wheel Hub Oil Level • Replacing Fuel Filter Elements (Both Fuel Filters) **** • Cleaning MFWD Axle Vent Filter • Cleaning Fuel Tank Vent Filter ** • Checking Air Intake System • Testing Coolant • * INITIAL engine oil and filter change is 100 hours maximum of operation.
SCHEDULED interval (250 hours) can be extended to 375 hours if John Deere PLUS50 oil and John Deere filter are used. ** Interval can vary according to operating conditions *** Daily or 10 Hours when operating in extremely wet and muddy conditions or where AutoTrac is used. **** Replace at 500 hours or annually whichever comes first.