Annual Service Inspecting Auxiliary Drive Belt Inspect auxiliary drive belt as outlined below. 1. Inspect auxiliary drive belt indicator. 2. If indicator (A) is within normal operating band (B), do NOT change auxiliary drive belt. If indicator (A) is within stretch indicator band (C), change auxiliary drive belt. RXA0078787 —UN—08APR05 3. Release belt, then check to see that tensioner pulley turns smoothly without binding. See Replacing Auxiliary Drive Belt in this section. 4. If tensioner pulley appears damaged or worn, replace it. A—Indicator B—Normal Operating Band C—Stretch Indicator Band OURX935,00002E3 1911JUN081/1 Inspecting Seat Belts CAUTION:
If seat belt system, including mounting hardware, buckle, belt, or retractor shows any sign of damage such as cuts, fraying, extreme or unusual wear, discoloration or abrasion, the entire seat belt system should be replaced immediately. Replace belt system only with replacement parts approved for your machine. TS205 —UN—23AUG88 Inspect seat belts (A) and mounting hardware. If seat belts need to be replaced, see your John Deere Dealer. A—Seat Belts RXA0062690 —UN—20SEP02 OURX935,00002E4 1919JUN081/1 Replacing Cab Air Filters using agricultural chemicals. * Interval can vary according to operating conditions CAUTION: Cab air filters are not designed to filter out harmful chemicals.
Follow the instructions in the implement operator’s manual and those given by the chemical manufacturer when See Cleaning Cab Air Filters in section 102 of this Operator’s Manual. OURX935,000036D 1919JUN081/1 1053 122208 PN=279