John Deere Omar287594 — Replacing Auxiliary Drive Belt

General Services Checking Air Conditioning System CAUTION: Avoid possible injury. Improper servicing may cause refrigerant to penetrate eyes and skin or cause burns. X9811 —UN—23AUG88 IMPORTANT: R134a refrigerant must be used. This requires special equipment and procedures. See your John Deere Dealer. NOTE: Some oil seepage from compressor shaft seal is normal. Check the following if air conditioner will not cool, or cooling is intermittent: Clean grille, radiator, and refer to Cleaning Radiator, Coolers and Air Conditioning Condenser in this section. Inspect and clean cab air filters. Replace filters if required. Refer to Cleaning or Replacing Cab Air Filters in this section.

For standard air conditioning, operate engine at 2000 rpm and set compressor switch (A) to ON position and blower knob (B) to HIGH position. For ClimaTrak, operate engine at 2000 rpm and set compressor knob (A) to ON position and blower knob (B) to HIGH position. Caution for Escaping Fluid A B RXA0078794 —UN—01FEB05 Standard A/C Controls If problems persist, see your John Deere Dealer. A B A—Compressor Switch/Knob B—Blower Knob RXA0078795 —UN—06JUN05 ClimaTrak OURX935,000030D ­19­12JUN08­1/1 110­3 122208 PN=300