John Deere Omar287594 — TouchSet Depth Control Troubleshooting

Troubleshooting Selective Control Valve Troubleshooting Symptom Problem Solution Remote cylinder will not lift load Flow check Cycle SCV levers Excessive load Reduce load Hoses not completely installed Attach hoses correctly Incorrect remote cylinder size Use correct size cylinder SCV transport lock engaged Release SCV transport lock Incorrect or damaged hose tips Replace hose tips Remote cylinder rate of travel too fast or too slow Incorrect flow rate Adjust flow rate Direction of remote cylinder travel is reversed Incorrect hose connections Reverse hose connections Hoses will not couple Incorrect hose male connectors Replace connectors with ISO Standard connectors Detent does not hold or releases too soon Detent time set incorrectly Set time correctly SCV lever is not being released to neutral Release SCV lever from detent to neutral in less than 0.8 seconds SCV lever does not release SCV float is being ”commanded” Do not push lever down in forward position Lever mechanism failed See your John Deere Dealer Implement does not operate or does not operate correctly Incorrect hose connections See implement operator’s manual See your John Deere Dealer Implement is sluggish SCV stack filter plugged Replace SCV stack filter OURX935,00003AC ­19­03SEP08­1/1 125­8 122208 PN=328