Controls and Instruments Service Alert Indicator (A): Light flashes and alarm sounds five times to inform operator that a performance or operational problem has been detected, which needs to be resolved as soon as possible. Continued operations can cause a Service Alert to escalate into a STOP indicator. If appropriate corrective action is not taken soon (serviced, repaired, operated in a different manner), a significant reduction in performance will occur, resulting in machine damage. B A RXA0079330 —UN—28FEB05 Information (INFO) Indicator (B): Light comes on continuously and alarm sounds for two seconds, telling operator that a fault condition has been detected.
Tractor operations can continue without damage; however, performance of some functions may be degraded. Operating in a different manner may correct the out of range condition and clear INFO indicator. Service Alert And Information Indicators Some Service Alerts and Information Indicators can be ”acknowledged” and display cleared by pressing the Select Switch on the CommandCenter. The display will return to a normal mode. This will allow tractor function to continue however the diagnostic trouble code may reappear at a later time if the condition still exists.
C RXA0082311 —UN—18JUL05 CCU 1713.00 OK When either a Service Alert or Information Indicator is displayed it is suggested the tractor be placed in PARK and engine shut off. Restart engine to verify active diagnostic trouble code will reappear before contacting your John Deere dealer. The code condition will be verified when tractor is restarted. Service Alert Message D A—Service Alert Indicator B—Information Indicator C—Identification System D—Transmission System RXA0082312 —UN—18JUL05 PTI 524238.31 Information Message BB92646,0000091 1919AUG052/2 154 122208 PN=34