Operator Station Adjusting Air Suspension Seat A B RXA0080139 —UN—04APR05 E I H RXA0086017 —UN—20JAN06 J D Seat with Flipup Armrest—Used with Instructional Seat K L G Seat with FoldDown Armrest A—Lumbar Support Lever B—FoldDown Armrest C—FlipUp Armrest D—Seat Height Adjustment E—Armrest Adjustment F—Armrest Angle Adjustment G—Backrest Angle Adjustment H—Seat Swivel ForeAft Adjustment J— Suspension Shock Dampening K—Lateral Movement Lock L—ForeAft Movement Lock M—Armrest Height Adjustment Screws 1 IMPORTANT: If single lever control is installed on CommandARM, lever may contact righthand console if seat is placed in full righthand swivel position.
Check seat swivel as well as seat height and foreaft adjustment to avoid this contact. Seat Swivel Lift up on handle (H) to allow seat to swivel. Push down on handle to lock seat in position. ForeAft Seat Position Pull up on handle (I) to allow the seat to slide forward or backward. Dampening Handle (J) adjusts suspension shock. Moving lever to farthest down position provides the firmest ride; farthest up position provides softest ride. Lumbar Support Adjustment Rotate 5position lever (A). Lateral Movement Lock Push down on handle (K) to unlock lateral seat suspension. Pull up on handle to lock seat in position.
Weight and Height Adjustment Turn key to Press lower portion of switch (D) to lower seat or press upper portion of switch to raise seat. ForeAft Movement Lock Push down on handle (L) to unlock fore and aft suspension. Pull up to prevent foreaft movement. Armrest Height Adjustment Press button (E) or loosen screws (M) to adjust armrest height. Armrest Angle Turn knob (F) to adjust armrest angle. Backrest Angle Pull up handle (G) and adjust backrest to desired angle. 1 FlipUp armrest only OURX935,0000472 1912AUG081/1 251 122208 PN=64