Operating the Engine Using a Battery Booster or Charger RXA0086722 —UN—10FEB06 RXA0080175 —UN—07APR05 B A A—Positive Terminal B—Ground CAUTION: Gas given off by batteries is explosive. Keep sparks and flames away from batteries. Make last connection and first disconnection at a point away from booster batteries. Booster Battery 1. Attach cable (red) to the remote positive terminal (A) of the starter and positive terminal of booster battery. IMPORTANT: Be sure polarity is correct before making connections. Reversed polarity will damage electrical system or possibly cause battery to explode. 2. Attach (black) battery cable to negative terminal of booster battery.
Attach other end to a ground (B) on tractor frame. 3. Remove ground cable first when disconnecting. If two or more booster batteries are used, they must be connected in parallel ensuring booster batteries are producing a 12 volt charge. Battery Charger IMPORTANT: Set battery charger at the nominal 12 volt and no more than 16 volt maximum. Avoid possible injury or death from machinery runaway. 1. Attach positive charger lead to positive remote terminal with charger in OFF position. Attach negative charger lead to negative ground at tractor frame, away from batteries. Do not start engine by shorting across starter terminals. Machine will start in gear if normal circuitry is bypassed. 2.
Switch charger to ON and charge battery according to charger manufacturers instructions. NEVER start engine while standing on ground. Start engine only from operator’s seat, with transmission in neutral or park. 3. Switch charger to OFF. Remove negative charger lead first, then positive lead. OURX935,0000584 1910FEB061/1 353 122208 PN=82