Operating Powershift Transmission Setting Startup Gear D B C IMS A RXA0082971 —UN—04AUG05 + CommandCenter A—Settings Switch B—Command Dial C—Select Switch D—Display 1. Press Settings Switch (A). Display will be: Implement Sel RPTO Engage Transmission Hitch Slip Response To change reverse start gear, using Command Dial scroll down to REV Start Gear and press select switch. Rotate Command Dial clockwise to increase the gear displayed or counterclockwise to decrease the gear displayed. 4. A number will be displayed. Rotate Command Dial clockwise to increase the gear (number) displayed or counterclockwise to decrease the gear (number) displayed. 2.
Using Command Dial (B), scroll down to Transmission , then press Select Switch (C). Display will be: Auto Shift Fwd Start Gear Rev Start Gear Back 5. When the desired number for the gear is displayed, press Select Switch. NOTE: New startup gear will not be locked into system memory until engine is turned off and tractor is restarted. 3. To change forward start gear, using Command Dial scroll down to Fwd Start Gear and press Select Switch. Rotate Command Dial clockwise to increase the gear displayed or counterclockwise to decrease the gear displayed. 6. Turn Key switch OFF, after engine is shut off, restart engine. BB92646,0000083 1916AUG051/1 414 122208 PN=96