. MAINTENANCE SERVICE PROCEDURE CLEAN HYDRAULIC TANK STRAINER WARNING CLEAN TRANSMISSION CASE STRAINER WARNING Drain the oil from the transmission case before starting the "CHANGE OIL IN 4 - 75 The parts and oil are at high temperature after th e engin e is stopped , and may cause serious burns. Wait for the temperature to go down bef ore starting the operation . If there is still p ressure remaining inside t he case , the oil or plug may fly out. Turn the plug slowly to release the pressure, then remove it caref ully. 1. Remove plu g (1) of the strainer (2 places ) inside the f ront left wheel. 2. Take the st rainer out from strainer case (2), then wash it in l fuel. clean diese 3.
Assemble t he strainer to strainer case (2), then in stall p lug ( 1). The parts and oil are at high temperature after th e engin e is stopped , and may cause serious burns. Wait for the temperature to go down bef ore starting the operation . If there is still p ressure remaining inside t he case , the oil or plug may fly out. Turn the plug slowly to release the pressure, then remove it caref ully. operation. Fo r details, see Sectio TRANSMISSIO N CASE (PAGE 4-63)" 1. Remove bo strainer. lt (1), then remove cover (2) and take out the the 2. Remove an y dirt stuck to the strainer, then wash i n clea n diesel fuel or flush 3. Install the s ing oil.
If the strainer is trainers in their original damaged, replace it. position.