EVERY 1000 HOURS SERVICE Remove plug (I), then remove Opentheenginesidecoverlocated To fit the cartridge, put the seal spring together with strainer. Remove all dirt from the surface of on the right of engine hood. Close valve (1). face in contact with head, then screw it up about l/2 to 314 of a the strainer, then wash in clean light oil. If strainer is damaged, remove cartridge (2) by turning it Using the filter wrench provided, turn.(Becarefulnottoapplyexces- sive torque.) replace with a new part. counterclockwise. After replacement, open valve (I 1. Install strainer and spring, then install plug (I). dab of engine oil to the seal face. Fit a new cartridge after applying a cartridge.
Be sure to use a genuine Komatsu If O-ring of the plug is damaged, replace with a new part. After replacing the cartridge, start the engine and check that there is seal surface. no leakage of water from the filter -107-