Komatsu — STORAGE

STORAGE STORAGE BEFORE STORAGE To place the machine in storage for an extended period of time, the following measures must be taken to insure that it can be returned to operation with minimum of service. l Apply a thin coat of grease to metal surface (hydraulic piston rods and splined shaft). l When the ambient temperature is anticipated to drop below O”C, always add antifreeze in the cool- ing water. l As to batteries, remove the termi- nals and cover them, or remove them from the machine and store separately. l Set each control levers to neutral or hold position, lock them and apply the parking brake. l After every part is washed and dried, the machine shall be housed in a dry building.

Never leave it outdoors. In case it is indispensable to leave it outdoors, lay wood plates on the ground, and park the machine on the wood plates and cover it with canvas etc. l Open the drain valve of the air tank to drain condensation. Close after completely drained. l Completely fill fuel tank, lubricate and change oil before storage. - 136- w-01373