Komatsu — FUEL, COOLANT AND LUBRICANTS

FUEL, COOLANT AND LUBRICANTS (I) When fuel sulphur content is less than 0.5%, change NOTE: described in this manual. oil in the oil pan every periodic maintenance hours (2) When starting the engine in an atmospheric tem- perature of lower than O”C, be sure to use engine oil Change oil according to the following table if fuel ofSAElOW,SAElO-30andSAEISW-40,eventhough sulphur content is above 0.5%. or less in the day time. an atmospheric temperature goes up to 10°C more Fuel sulphur content Change interval of oil in engine oil pan (3) Use API classification CD as engine oil and if API classification CC, reduce the engine oil change inter- val to half.

:;::::t (4) For axle oil, use only recommended oil as follows. SHELL: DONAX TT or TD CHEVRON: TRACTOR HYDRAULIC FLUID CALTEX: RPM TRACTOR HYDRAULIC FLUID TEXACO: TDH OIL MOBIL: MOBILAND SUPER UNIVERSAL ASTM: American Society of Testing and Material Ir It is possible to substitute engine oil CLASS-CD API: American Petroleum Institute SAE: Society of Automotive Engineers SAE30 for axle oil. If noise comes from the brake, it is no problem of durability. Specified capacity: Total amount of oil including oil for components and oil in piping. Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance. - 141-