INSTRUMENTS AND CONTROLS c: CAUTION MONITOR * GROUP (Emergency stop items) 1. BRAKE LINE FAILURE MONITOR Park the machine on level ground and check the monitor lamps. Confirm that these monitor if any abnormality occurs while * lamps light for about 3 seconds the engine is running, the appropri- after turning the starting switch ate monitor lamp and the warning to ON. If any monitor lamp does lamp will flash and the alarm buzzer tributor to inspect that monitor time. not light, ask your Komatsu dis- will sound intermittently at the same lamp. This monitor indicates a drop in the brake oil pressure when the brakes are operated.
If the lamp flashes, stop the ma- chine immediately and check the brake system. * After checking and repair of brake system, push in over-stroke sensor rod. If this operation is not done, a buzzer and lamp will con- tinue to warn of brake line trouble. - 16- \V-03612