CHECK BEFORE STARTING c. CHECK AND REFILL COOLANT d. CHECK OIL LEVEL AND REFILL IN ENGINE OIL PAN Remove radiator cap (I) on rear machine body, and checkthat cooling water isfilled up todepth indicated by shadowed portion. If not, add water. j, If the volume of coolant added is more than usual, check for pos- sible water leakage. Ir Confirm that any oil is not in cool- ant. A Do not remove the cap while cool- ing water is hot. Hot water may 1. Open the inspection window atthe rear right side of the machine. 2. Use dipstick (G) to check the oil level. 3. The oil level should be between mark Land H, if necessary, add oil at oil filler (F).
Ir Thetype of lubricant used depends on the ambient temperature. Se- lect according to the table “FUEL, COOLANT AND LUBRICANTS”. Ir After checking, be sure to tighten the handle of(G) and (F). spout out. Before removing radiator cap, turn cap slowly to relieve inner pres- sure. - 46 -