daewoo Solar 140LC-V — Seat Belt Locking and Unlocking

SEAT BELT WARNING! The seat belt is for the operator's safety and should be worn at all times. Before driving the machine, adjust the seat to the desired position for maximum comfort and machine control, then fasten the seat belt. Seat belts must be worn across the pelvic region and adjusted snugly to lessen the chance and severity of injury in the event of an accident. Never fasten a seat belt across the abdomen. Under no circumstances should the operator be standing in the cab when operating the excavator. Do not adjust the seat position while the vehicle is moving because a loss of control may result. Stop the machine, apply the parking brake, and then adjust the seat.

Always, check the condition of seat belt and belt bracket before fastening it. Do not use it with twists in it. Replace belt or bracket if damaged or worn. SEAT BELT LOCKING AND UNLOCKING Insert belt end (1, Figure 85) into the buckle (2). Pull the belt to check that belt end is locked into buckle. Adjust belt length so that it comfortably tight against the operator's pelvic region (hipbone). HAOB140L Figure 85 Press the button (3, Figure 86) in the center of buckle (2) and pull out belt (1) to unlock. HAOB150L Figure 86 022-00058E Operation and Maintenance Manual Operating Controls 2-47