daewoo Solar 140LC-V — Operational Checks Before Starting Engine

STARTING AND STOPPING THE ENGINE INSPECTION BEFORE STARTING ENGINE WARNING! If flammable materials such as leaves, paper, etc. are allowed to accumulate on high temperature components, such as the engine muffler and turbo, a fire may occur. Fuel, lubricant and hydraulic oil leaks, may cause a fire. If there is anything wrong, perform the appropriate corrective action. Before starting engine, inspect the following items; 1. Electric system - Check for damaged electric cables, and loose or missing connectors. 2. Fuel system - Drain water and sediment from fuel tank and water separator. 3.

Hydraulic system - Check for hydraulic oil leaks, damaged tubing and hoses, and interference points of components. 4. Lubrication - Perform all daily and periodic maintenance services. Perform services according to reading shown on hour meter. 5. Safety - Perform a machine walk-around. Make sure that no one is under the machine or performing any maintenance on it, before starting engine. 6. After starting machine - Check that all operational controls and components, are in proper operating condition, and are functioning correctly. Stop operation and correct any malfunction before continuing work. OPERATIONAL CHECKS BEFORE STARTING ENGINE WARNING!

When leaving operator's seat, set the safety lever to "LOCK" (Figure 1) position, if not a serious accident could occur by accidentally moving the travel or work levers (joysticks). HAOA390L Figure 1 1. Set safety lever on "LOCK" (Figure 1). 2. Fasten seat belt. Check for proper operation and condition. 3. Set all operation levers in "NEUTRAL." NOTE: Be careful not to touch any switches when starting engine. 3-2 Operation 022-00058E Operation and Maintenance Manual