STARTING ENGINE WITH A BOOSTER CABLE WARNING! 1. An explosive gas is produced while batteries are in use or being charged. Keep flames or sparks away from the battery area. 2. Charge batteries in a well-ventilated area. HAOA440L Figure 12 3. Always wear eye protection when starting a machine with jumper cables. 4. Improper jump starting procedures can cause an explosion resulting in personal injury. 5. Jump start vehicles on dry ground or concrete. Do not jump start the machine on a steel floor, because the floor is always grounded. 6. When starting from another machine, make sure the machines do not touch. 7.
Always connect the auxiliary battery positive (+) terminal to depleted battery positive (+) terminal first. Then connect auxiliary battery negative (-) terminal to the frame of the depleted battery machine second. 8. Connect positive cable first when installing cables and disconnect the negative cable first when removing. IMPORTANT The machine has a 24V (-) negative ground electrical system. Use the same capacity 24V booster batteries when jump starting engine. If the batteries are drained during starting procedures, jump start engine using auxiliary or booster batteries according to the following procedure; 3-8 Operation 022-00058E Operation and Maintenance Manual