OPERATING PRECAUTIONS WARNING! Do not rest your feet on the travel pedals during normal machine operation. Unexpected machine travel may occur in this situation. 1. Before starting work, investigate terrain and soil condition. Level ground and drain area if necessary. 2. Install window guards when working where there is a possibility of falling rocks or other objects. Figure 52 3. Check strength of supported structures in advance before working on them. If insufficient, reinforce it. If any doubt exists about structural strength, refuse to operate unit. 4. It is possible that the boom, arm or bucket may come into contact with the upper or lower structure of the machine.
There are digging conditions which could allow this to happen. 5. Do not continually "bottom out" the hydraulic cylinders. Machine damage may occur if the cylinders are fully extended or retracted, example: arm cylinder fully retracted and the bucket cylinder is extended to rotate the bucket into the ground. Figure 53 HAOB860L Figure 54 3-26 Operation 022-00058E Operation and Maintenance Manual